How to Maintain Oil Seals and Maximize Their Performance
We often take the maintenance of OIL SEALS USED FOR INDUSTRIAL / MACHINES and their accessory tools lightly. But a slightly defective seal or a dented shaft can cause a lot of damage and even fail the whole equipment process. A failed oil seal means wastage of money, time and even loss of company reputation.
The reasons behind a failed oil seal are several. Here you can find some of the ways to avert seal failure and maximize its performance rapidly.
1. Protecting from dirt and impurities
Dust, dirt and debris are often the primary reasons for the failure of a seal. When a TTO oil seal is used in high pressure equipment, even the smallest particle can make a gap in between the seal and the equipment. This results in the access of impurity or the leakage of fluid or gas. So the best way to ensure that no dust particle pollutes the oil seal is to store it in a container or a sealed bag and keep it away from a place where dust and impurities exist.
2. Keeping the surface clean
While taking the oil seals from a storage bag, make sure that they do not get dirty. The surface where the seal will come into contact must be cleaned properly. Some oil seals that have greasy features are very vulnerable to dust. So, what you can do is separate the seals from other products and clean surfaces of bins, tables, conveyors, etc separately to minimize the chances of the oil seals getting dusty.
3. Protecting the shaft
Keep the shaft of the end application dust-free and protect it from any kind of damage. This will increase the performance of oil seals as well as the equipment where the former will fit into. If there is the slightest dent or chip in the shaft, the seal will work not function properly and the contaminants will infiltrate into the equipment. To fix this problem, it is required to wrap the shafts in mesh rubber screen or any other protective material and keep them in their own compartments.
4. Maintaining oil accessories
The accessories used with TCK Oil Seals are to be protected as much as the former. Installation tools, grease container, etc. are to be stored in a sealed container when they are not in use. This will lower the chances of infiltration of impurities. Also, make sure that the installation tools have no dented edge because this can affect the oil seal at the time of the installation process. For Source Info, Click Here!
A/C COMPRESSORS
AUTO SEALS
HYDRAULIC SEALS USED FOR HYDRAULIC CYLINDERS
OIL SEALS USED FOR INDUSTRIAL / MACHINES
Find below a list of the top
Oil Seals in Doha, Qatar:
- ANSHORE TRADING
Location: OFFICE R-20, 3RD FLR, GLOBAL BUSI CENTRE, C RING RD,
Phone: 44023997
Timings:8.00AM-6.00PM
Key Personnel:THAJU MON, MNGR
- SOLARLINE TRADING & LOGISTICS WLL
Location: OFFICE 3, ABDULLAH BIN THANI BLDG - 5, NR V I P R / A,
Phone: 44622070
Timings:8.00AM-6.00PM
Key Personnel:SHALIN, TRADING
HAFIS, LOGISTICS
- ORIENTAL TRADING CO LTD
Location: 1ST FLR, E - BLOCK, AL WAAB CITY, SALWA RD,
Phone: 44466333
Timings:7.30AM-5.00PM : SUN - THUR
Key Personnel:V S Narayanan , Mng Dir
V M Mathew , Fin Mngr
MURUGAVEL , G M - SALES
KRISHNAKUMAR, G M - SERVICE
Sunil B K , Mktg Mngr
Rajeev Menon , Comm Mngr
RAJAGOPAL, DIV MNGR - PLANT HIRE
- BEHZAD TRADING ENTERPRISES WLL
Location: NR ORIENTAL BAKERY, OLD AIRPORT ( H O ),
Phone: 44433236;44433350;44433454 - H O;55865403;66931698 - MOBILE;44633633 - INDL AREA ( ST 2 );77454266 - MOBILE;44600535 - AL KASSARAT ST ( ST 8, INDL AREA );55506198 - MOBILE;44431895 - BARWA VILLAGE ( SHOP 19, BLDG 18 );31112816 - MOBILE;44600051 - AL WAKALAT ST ( ST 32, INDL AREA );33132672 - MOBILE
Timings:7.30AM-6.00PM ( H O )
Key Personnel:J K MENON , G M
JITHESH P, SALES MNGR
ABEY RAJU, ASST SALES MNGR
- ORIENTAL AUTO PARTS
Location: AL WAKALAT ST 29, INDL AREA,
Phone: 44772693;44219778;74793968 - MOBILE
Timings:7.00AM-8.00PM
Key Personnel:MOHD SHEREEF , G M
SHARAFUDEEN, OPS IN-CHARGE
- ADEEL HEAVY EQUIPMENT TRADING & CONTRACTING
Location: AL ATTIYA ST 537, GATE 5, ZONE 57, INDL AREA,
Phone: 44411286 - H O
Timings:7.00-12.00/2.00-7.00
Key Personnel:WAQAS JAVAID, G M
SHAMSHAD, SR SALES MNGR
- AL BAHAR TRADING & CONTRACTING WLL
Location: SHOP 13, BLDG 5, BARWA VILLAGE, AL WAKRAH,
Phone: 44114278;55339215 - MOBILE
Timings:
Key Personnel:MANSOOR, G M
ARIF SEENTAKATH, SALES MNGR
- AL BITTAR HYDRAULIC SERVICE & SPARE PARTS WLL
Location: AL WAKALAT ST 27, INDL AREA,
Phone: 44164057;50004313 - MOBILE
Timings:7.00AM-7.30PM
Key Personnel:HISHAM BIN SALAM, B D M
NAVAS C K, MNGR
- JAIDAH GROUP AUTOMOTIVE ( ISUZU SHOWROOM )
Location: NR JAIDAH FLYOVER,
Phone: 8003424 - TOLL FREE
Timings:8.00AM-6.00PM
Key Personnel:Hari Subramony , Sales Mngr
- AL AMANI AUTO SPARE PARTS WLL
Location: AL WAKALAT ST 29, INDL AREA
,
Phone: 44501980;44501981 - ST 29;30942459 - MOBILE;40376735 - ST 23 BR;30942493 - MOBILE;44364445 - BIN MAHMOUD BR;30942478 - MOBILE;40377166 - ST 125 BR;30618004 - MOBILE
Timings:7.00AM-7.00PM
Key Personnel:RAJESH RAJAN, M D
MS MINI NANDAKUMAR, ACCTS
Related Tags: Oil Seals in Doha Qatar |
Anshore Trading in Doha Qatar |
Solarline Trading & Logistics Wll in Doha Qatar |
Oriental Trading Co Ltd in Doha Qatar |
Behzad Trading Enterprises Wll in Doha Qatar |
Oriental Auto Parts in Doha Qatar |
Adeel Heavy Equipment Trading & Contracting in Doha Qatar |
Al Bahar Trading & Contracting Wll in Doha Qatar |
Al Bittar Hydraulic Service & Spare Parts Wll in Doha Qatar |
Jaidah Group Automotive ( Isuzu Showroom ) in Doha Qatar |
Al Amani Auto Spare Parts Wll in Doha Qatar |
Qatar Directory on Facebook |
Qatar Directory on Twitter |
Qatar Directory Online
OIL SEALS
Find below a list of the top products suppliers of
Oil Seals in Doha, Qatar:
Related Tags:Oil Seals products in doha qatar |
HALLITE Products in Doha Qatar |
ISUZU MOTORS Products in Doha Qatar |
MUSASHI Products in Doha Qatar |
TTO Products in Doha Qatar |
Qatar Directory on Facebook |
Qatar Directory on Twitter |
Qatar Directory Online